Destination: CONSOLE Routing code: C Weight: 99
Warranty : NO
DCM0200 VTSU-B NOT LOADED
Meaning
VTSU-B is not loaded. As a result it cannot be called.
DCM0202
Destination: CONSOLE Routing code: C Weight: 70
Warranty : NO
DCM0202 VTSU-B INIT: DMS ERROR '(&01)' WHEN OPENING FILE '(&00)'. IN SYSTEM MODE: /HELP-MSG DMS(&01)
Meaning
File (&00) exists but cannot be opened.
Possible reasons:
- The file is defective.
- The file is protected by a password.
For more detailed information about the DMS error code enter /HELP-MSG in
system mode or see the BS2000 manual 'System Messages'.
Response
Take measures in correspondence to the DMS error code.
If necessary specify the password.
If the file is defective, reconstruct the file.
Contact the system administrator, if necessary.
DCM0203
Destination: CONSOLE Routing code: C Weight: 70
Warranty : NO
DCM0203 VTSU-B INIT: DMS ERROR '(&01)' WHEN ACCESSING FILE '(&00)'. IN SYSTEM MODE: HELP-MSG DMS(&01)
Meaning
The user is not authorized to read the file (&00).
For more detailed information about the DMS error code enter /HELP-MSG in
system mode or see the BS2000 manual 'System Messages'.
DCM0204
Destination: CONSOLE Routing code: C Weight: 70
Warranty : NO
DCM0204 VTSU-B INIT: DMS ERROR '(&01)' WHEN CLOSING FILE '(&00)'. IN SYSTEM MODE: /HELP-MSG DMS(&01)
Meaning
For more detailed information about the DMS error code enter /HELP-MSG in
system mode or see the BS2000 manual 'System Messages'.
Response
Check the file, if necessary contact the system administrator.
DCM0205
Destination: CONSOLE Routing code: C Weight: 70
Warranty : NO
DCM0205 VTSU-B INIT: VTSU CONTROL RECORD MISSING IN FILE '(&00)'
Meaning
The first line must be /BEGIN VTSU PARAMS or /BEGIN VTSU-PARAMS.
Response
Correct the file.
DCM0206
Destination: CONSOLE Routing code: C Weight: 70
Warranty : NO
DCM0206 VTSU-B INIT: INVALID OR UNKNOWN PARAMETER '(&00)' IN FILE '(&01)'
Response
Correct the file.
DCM0207
Destination: CONSOLE Routing code: C Weight: 70
Warranty : NO
DCM0207 VTSU-B INIT: END RECORD MISSING IN FILE '(&00)'
Meaning
The very last line of the file (&00) must be /END PARAMS or /END-PARAMS.
Response
Correct the file.
DCM0208
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
DCM0208 'CSTRING' OPERAND: '(&00)' UNKNOWN OR ILLEGAL BY SUBSYSTEM VTSUTRAC INITIALIZATION
Meaning
The value of the CSTRING operand in the /CREATE-SUBSYSTEM command
contains unknown or illegal parameters.
Response
Correct the operand value and try again.
DCM0209
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
DCM0209 WARNING: INTERNAL ERROR X'(&00)' IN '(&01)' INTERFACE. 7 BIT CODED CHARACTER SET ASSUMED
Meaning
Internal error in system interface.
Response
Analyse the received error code and contact the system administrator.
DCM0210
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
DCM0210 WARNING: INVALID USER DEFAULT CODED CHARACTER SET. STANDARD 7 BIT CODED CHARACTER SET ASSUMED
Meaning
The user default coded character set is invalid.
Possible causes are :
(1) the default coded character set is not known by XHCS-SYS
(2) the default coded character set (not EDF03IRV) has a restricted
compatibility with its reference coded character set
(3) the default coded character set is not a EBCDIC one
(4) the special routines for arabic coded character set support
are not present.
Response
- Ask the system administrator to define the desired 8 bit coded
character set in the XHCS-SYS tables or
- ask the system administrator for the list of 8 bit character sets
supported by XHCS-SYS and supported by this terminal and have such
a code defined as user default character set or set in XHCS tables
- ask the system administrator to install the special routines for
arabic coded character set support
DCM0211
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
DCM0211 WARNING: USER DEFAULT CODED CHARACTER SET NOT SUPPORTED BY TERMINAL. 7 BIT CODED CHARACTER SET ASSUMED
Meaning
The user default coded character set is a 8 bit coded character set that
the terminal does not support.
Response
- Employ a terminal supporting this 8 bit coded character set or
- modify the set up of the terminal for this 8 bit coded character set
(with SIDATA) or
- ask the system administrator to modify the user default coded
character set to one supported by the terminal.
DCM0212
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
DCM0212 WARNING: XHCS NOT AVAILABLE. 7 BIT CODED CHARACTER SET ASSUMED
Meaning
The subsystem XHCS-SYS is not available. As a result the use of the
8 bit functionality is not possible. Only the 7 bit functionality is
available.
Response
Ask the system administrator to remove user default coded character set or
to install XHCS.
DCM0213
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
DCM0213 WARNING : INVALID USER DEFAULT CODED CHARACTER SET WITH 7 BIT TERMINAL. 7 BIT CODED CHARACTER SET ASSUMED
Meaning
On a 7-bit terminal, only blanks or EDF03IRV is allowed as user default
coded character set name.
Response
- Check user default character set name and employ an adequate terminal or
- ask the system administrator to change the user default coded character
set to EDF03IRV.
DCM0214
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
DCM0214 WARNING: XHCS NOT PRESENT. 7 BIT CODED CHARACTER SET ASSUMED
Meaning
The subsystem XHCS-SYS is not present. As a result the use of the 8 bit
functionality is not possible. Only the 7 bit functionality is available.
Response
Contact the system administrator about XHCS-SYS availability.
DCM0215
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
DCM0215 VTSU-B V13.3A VTSUCB V06
DCM0216
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
DCM0216 REQUESTED VARIANT IS NOT SUPPORTED
DCM0217
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
DCM0217 NO MEMORY AVAILABLE
DCM0218
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
DCM0218 ESC-SEQUENCE NOT ALLOWED
DCM0219
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
DCM0219 OVERFLOW OF BUFFER
DCM0220
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
DCM0220 ERROR IN TABLE
DCM0221
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
DCM0221 ENCRYPTION HAS BEEN REQUESTED FOR THIS APPLICATION
Meaning
The terminal does not support encryption mechanism.
Response
Contact the system administrator.
DCM0222
Destination: CONSOLE Routing code: C Weight: 70
Warranty : NO
DCM0222 VTSU-B INIT: INVALID LINE FORMAT IN FILE '(&00)' AT LINE '(&01)'. LINE IGNORED
Meaning
The specified line does not respect the described format.
The line is ignored for the current session.
Response
Correct the specified line. The correction will be effective only after
the next loading of the subsystem.
DCM0223
Destination: CONSOLE Routing code: C Weight: 70
Warranty : NO
DCM0223 VTSU-B INIT: INVALID VARIANT '(&00)' IN FILE '(&01)' AT LINE '(&02)'. LINE IGNORED
Meaning
The 8-bit variant given at the specified line is not valid :
- either the 8-bit variant is not supported by XHCS-SYS
- or the variant is an ISO variant.
The line is ignored for the current session.
Response
Correct the 8-bit variant. The correction will be effective only after the
next loading of the subsystem.
DCM0224
Destination: CONSOLE Routing code: C Weight: 70
Warranty : NO
DCM0224 VTSU-B INIT: INVALID DEVICE TYPE '(&00)' IN FILE '(&01)' AT LINE '(&02)'. LINE IGNORED
Meaning
The device type given at the specified line is not valid.
The line is ignored for the current session.
Response
Correct the device type. The correction will be effective only after the
next loading of the susbsystem.