Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
CVRF010 NO ELEMENT MATCHES THE SPECIFIED WILDCARD PATTERN IN THE INPUT LIBRARY
Meaning
The specified wildcard pattern does not match any existing element
name/version of the input library
CVRF040
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
CVRF040 INPUT COMMAND NOT CONVERTED
Meaning
The command contains incompatible operands or illegal values.
Response
For more detailed information about the restrictions see the BS2000 manual
'SDF Dialog Interface'.
CVRF041
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
CVRF041 INPUT COMMAND CANNOT BE IDENTIFIED
Meaning
The description of this command does not exist in the syntax files
of SDF-CONV.
Response
Verify if this is an officially documented BS2000 command.
CVRF042
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
CVRF042 WRONG VALUE SPECIFIED FOR '(&00)' OPERAND
Meaning
Input command not converted. A converted SDF format can be proposed in
comments if DOCUMENTATION=*MIN/*MAX is specified.
Note: The annotated SDF format is a basis for conversion, it is not a
final conversion result.
CVRF043
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
CVRF043 NO COMMENT LINE CAN BE GENERATED ALTHOUGH REQUESTED THROUGH 'DOCUMENTATION' OPERAND
Meaning
The input was not correctly converted from its description in the
syntax file because it contains unknown operands.
CVRF060
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
CVRF060 COMMAND NAME ALREADY SPECIFIED IN 'UNCHANGED-CMD' OPERAND
CVRF061
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
CVRF061 COMMAND CANNOT BE CONVERTED TO A SECURED SDF FORM; ORIGINAL INPUT REMAINS VALID
Meaning
For the conversion of this command, there exists a restriction. However,
a converted SDF form can be proposed in comments if DOCUMENTATION=*MIN/
*MAX was specified.
Note: The annotated SDF format is a basis for conversion, it is not a
final conversion result.
CVRF062
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
CVRF062 COMMAND CAN ONLY BE CONVERTED FOR BS2000 VERSIONS GREATER THAN OR EQUAL TO (&00)
Meaning
For the conversion of this command, there exists a restriction. However,
a converted SDF form can be proposed in comments if DOCUMENTATION=*MIN/
*MAX is specified.
Note: The annotated SDF format is a basis for conversion, it is not a
final conversion result.
CVRF063
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
CVRF063 COMMAND CAN ONLY BE CONVERTED FOR BS2000 VERSIONS LOWER THAN (&00)
Meaning
For the conversion of this command, there exists a restriction. However,
a converted SDF form can be proposed in comments if DOCUMENTATION=*MIN/
*MAX is specified.
Note: The annotated SDF format is a basis for conversion, it is not a
final conversion result.
CVRF064
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
CVRF064 DATA ESCAPE CHARACTER NOT FOLLOWED BY A CORRECT '(&00)'
Meaning
The data escape character generally introduces a procedure parameter or
a job variable. If none of these forms can be found, a warning is issued
and the processing continues in the same command record with the next
data escape character occurrence.
CVRF065
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
CVRF065 OPERAND '(&00)' CONVERTED TO '(&01)' WITH A MODIFIED VALUE
Meaning
The ISP operand allows values of data type <structured-name> but the
concerned SDF operand allows only values of data type <alphanum-name>.
Therefore hyphens in the operand value are suppressed by the conversion.
Example: the PNAME operand of the ISP command /PRINT can contain an
hyphen but the operand SPOOLOUT-NAME of the corresponding SDF
command /PRINT-FILE only accepts values of type <alphanum-name>.
CVRF100
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
CVRF100 DMS ERROR '(&00)'. SYSTEM FILE *SYSLST CANNOT BE OPENED. MORE INFORMATION: /HELP-MSG DMS(&00)
Meaning
Error when opening system file SYSLST. For more detailed information
about DMS error code enter /HELP-MSG.
(&00): DMS error code.
CVRF101
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
CVRF101 DMS ERROR '(&00)'. SYSTEM FILE *SYSLST CANNOT BE CLOSED. MORE INFORMATION: /HELP-MSG DMS(&00)
Meaning
Error when closing system file SYSLST. For more detailed information
about the DMS error code enter /HELP-MSG.
(&00): DMS error code.
CVRF102
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
CVRF102 DMS ERROR '(&00)'. WRITING TO SYSTEM FILE *SYSLST NOT POSSIBLE. MORE INFORMATION: /HELP-MSG DMS(&00)
Meaning
For more detailed information about the DMS error code enter /HELP-MSG.
(&00): DMS error code.
CVRF140
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
CVRF140 INPUT COMMAND IS CONVERTED TO AN EMPTY STRING; ORIGINAL INPUT IS ASSUMED IN OUTPUT FILE
Meaning
The input was correctly converted from its description in the syntax
file. However, additional handling (mandatory to generate the executable
SDF form) reduced it to an empty string.
Response
Contact the system administrator.
CVRF141
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
CVRF141 INPUT COMMAND NOT CONVERTED
Meaning
The input was not correctly converted from its description in the
syntax file because it contains unknown operands.
For more detailed information about the restrictions see the BS2000
manual 'SDF Dialog Interface'.
Response
If, however, the input procedure runs correctly and no operands are in
the restriction list, then contact the system administrator.
CVRF142
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
CVRF142 WRONG VALUE SPECIFIED FOR OPERAND '(&00)'
Meaning
Conversion is not possible because an ambiguous value was specified.
For more detailed information about the restrictions see the BS2000
manual 'SDF Dialog Interface'.
CVRF160
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
CVRF160 USER SYNTAX FILE CANNOT BE DEACTIVATED: RESULT OF CONVERSION MAY BE CORRUPTED
Meaning
During conversion of the commands, there is a risk of the definitions in
the user syntax file being found. This is why the user syntax file must
not be active.
Response
Verify whether the /MODIFY-SDF-OPTIONS *NONE command works.
CVRF161
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
CVRF161 THERE ARE NO MORE STATEMENTS TO BE READ: //END IS ASSUMED
Meaning
During reading of the SDF-CONV statements, end of file was reached.
After termination of the last statement, an END statement is assumed.
CVRF162
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
CVRF162 DATA PRESERVED FROM UPGRADE TO STATEMENT
Meaning
Data lines can be generated as statement lines in S-procedures with
PROGRAM-INPUT=*STMT(...). Data lines can be excepted from this handling if
EXCEPT-AFTER-CMD is specified.
CVRF21A
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
CVRF21A NO SUPPORT OF SEVERAL JOB VARIABLES AS PROCEDURE PARAMETER DEFAULT VALUE
CVRF21B
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
CVRF21B CONTROL-CHARACTERS CANNOT BE ACCEPTED
Meaning
Meaningful command and statement lines cannot contain characters which
have no text representation.
CVRF210
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
CVRF210 INPUT FILE CANNOT BE OPENED DUE TO '(&00)' ERROR '(&01)'
Meaning
For more detailed information about the error code enter /HELP-MSG.
(&00): PLAM or DMS error
(&01): four-digit message number.
CVRF211
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
CVRF211 INPUT FILE CANNOT BE CLOSED DUE TO '(&00)' ERROR '(&01)'
Meaning
For more detailed information about the error code enter /HELP-MSG.
(&00): PLAM or DMS error
(&01): four-digit message number.
CVRF212
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
CVRF212 INPUT FILE CATALOGED BUT IT HAS WRONG FCBTYPE
Meaning
SDF-CONV only supports SAM- or ISAM-files and PLAM- or OSM- libraries.
CVRF213
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
CVRF213 RECORD CANNOT BE READ FROM INPUT FILE DUE TO '(&00)' ERROR '(&01)'
Meaning
For more detailed information about the error code enter /HELP-MSG.
(&00): PLAM or DMS error
(&01): four-digit message number.
CVRF214
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
CVRF214 INPUT CANNOT BE FOUND DUE TO '(&00)' ERROR '(&01)'
Meaning
For more detailed information about the error code enter /HELP-MSG.
(&00): PLAM or DMS error
(&01): four-digit message number.
CVRF215
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
CVRF215 INPUT LIBRARY IS OF DMS DATA TYPE ISAM BUT IS NOT STRUCTURED AS AN OSM LIBRARY
CVRF216
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
CVRF216 PROCESSING OF MULTI-ELEMENTS IS NOT ALLOWED WITH OLD LIBRARY FORMAT 'ISAMLIB'
Meaning
OSM libraries are supported for compatibility reasons. The new library
format PLAM should be preferred.
Conversion is possible, but the element name must be specified
explicitly.
CVRF217
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
CVRF217 FIRST PROCEDURE LINE IS NOT A COMMAND
Meaning
Valid procedures must start with a command.
CVRF218
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
CVRF218 (&00) PROCEDURE CANNOT BE CONVERTED TO THE S-PROCEDURE FORMAT
Meaning
The JMS which supports the batch mode does not support S-procedure
features. The migration from /(BEGIN-)PROCEDURE to /SET-PROCEDURE-OPTIONS
is rejected.
CVRF219
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
CVRF219 NO POSITIONING ON INPUT FILE FIRST RECORD DUE TO '(&00)' ERROR '(&01)'
Meaning
For more detailed information about the error code enter /HELP-MSG.
(&00): PLAM or DMS error
(&01): Four-digit message number.
CVRF220
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
CVRF220 OUTPUT FILE CANNOT BE OPENED DUE TO '(&00)' ERROR '(&01)'
Meaning
For more detailed information about the error code enter /HELP-MSG.
(&00): PLAM or DMS error
(&01): four-digit message number.
CVRF221
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
CVRF221 OUTPUT FILE CANNOT BE CLOSED DUE TO '(&00)' ERROR '(&01)'
Meaning
For more detailed information about the error code enter /HELP-MSG.
(&00): PLAM or DMS error
(&01): four-digit message number.
CVRF222
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
CVRF222 OUTPUT FILE CANNOT BE DELETED DUE TO '(&00)' ERROR '(&01)'
Meaning
Output file already exists and REPLACE-OLD-FILE=*YES was specified but
an error has been reported when deleting the output file.
For more detailed information about the error code enter /HELP-MSG.
(&00): PLAM or DMS error
(&01): four-digit message number.
CVRF223
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
CVRF223 OUTPUT FILE ALREADY CATALOGED
Meaning
Output file is already cataloged but REPLACE-OLD-FILE=*NO was specified.
The output file cannot be overwritten: processing is aborted.
CVRF224
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
CVRF224 WRITING TO OUTPUT FILE NOT POSSIBLE DUE TO '(&00)' ERROR '(&01)'
Meaning
For more detailed information about the error code enter /HELP-MSG.
(&00): PLAM or DMS error
(&01): four-digit message number.
CVRF225
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
CVRF225 SPECIFIED OUTPUT LIBRARY MUST BE OF TYPE PLAM
CVRF230
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
CVRF230 NO STATEMENT CAN BE READ: //END IS ASSUMED
Meaning
SDF-CONV uses the SDF interface which means that the program name and its
statements description MUST be available in the syntax file hierarchy of
your task.
Response
Contact the system administrator.
CVRF260
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
CVRF260 (&00) FORM NOT GENERATED AS REQUESTED
Meaning
In case of conversion of batch procedures to an invariant-form, the
operand CONTEXT must be set to a compatible value.
CVRF261
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
CVRF261 INHOMOGENEITY BETWEEN 'FROM-FILE' AND 'TO-FILE' OPERAND VALUES
Meaning
When FROM-FILE designates several elements/versions to be converted,
TO-FILE must allow to designate at least the same number of target
elements/versions.
CVRF262
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
CVRF262 THE OPERAND VALUE FROM 'PROCEDURE-PARAMETERS' IS ERRONEOUS
Meaning
The value -when specified- must be bordered with parenthesis.
CVRF280
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
CVRF280 '(&00)' IS NOT A VALID DATA ESCAPE CHARACTER; NO REPLACEMENT
CVRF281
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
CVRF281 THE PROCEDURE PARAMETER '(&00)' IS LONGER THAN THE ALLOWED LENGTH FOR S-PROCEDURES. PROCESSING CONTINUES
Meaning
The name of S-procedure parameters is limited to 20 characters.
Response
It is advised to rename the procedure parameters into shorter names
which are unique within the procedure.
CVRF282
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
CVRF282 '(&00)' IS AN INVALID PROCEDURE PARAMETER FORM
Meaning
NOT-S procedure parameters must start with an '&' followed by
a procedure parameter name
Response
Your input procedure is erroneous: correct it
CVRF283
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
CVRF283 PROCEDURE/JOB VARIABLE PARAMETERS CANNOT BE REPLACED
Meaning
In the internal processing of an input record each data escape character
is replaced by an unambiguous control character which does not exist in
the input record. Unfortunately, the replacement is not possible because
the input record already contains all possible characters (X'00' to
X'FF').
CVRF340
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
CVRF340 SYNTAX FILE CONTAINING DESCRIPTION OF ISP COMMANDS TO BE CONVERTED CANNOT BE OPENED BY SDF
CVRF341
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
CVRF341 SYNTAX FILE CONTAINING DESCRIPTION OF ISP COMMANDS TO BE CONVERTED CANNOT BE CLOSED BY SDF
CVRF342
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
CVRF342 STANDARD SYSTEM SYNTAX FILE CANNOT BE OPENED BY SDF
Meaning
Conversion to an INVARIANT/ACCEPTED form is based on the definition of
the command in the system syntax file.
Response
Verify whether the SDF version is at least V2.
CVRF343
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
CVRF343 STANDARD SYSTEM SYNTAX FILE CANNOT BE CLOSED BY SDF
Meaning
Conversion to an INVARIANT/ACCEPTED form is based on the definition of
the command in the system syntax file.
Response
Verify whether the SDF version is at least V2.
CVRF350
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
CVRF350 INTERNAL ERROR: '(&00)'
CVRF360
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
CVRF360 '*STD' ENTRY FROM 'EXPECT-CONTINUATION' OR 'PRODUCE-CONTINUATION' OPERANDS CANNOT BE ASSOCIATED WITH MEANINGFUL VALUE: PROCESSING ENDS
Meaning
In procedures, commands may be split over several lines, provided the
continuation character '-' is specified at the end of each line.
Its position may vary from system to system and can be read interactively
with the /SHOW-SDF-OPTIONS command or via the CMDSTA SDF subprogram
call. This subprogram call currently fails.
Response
Contact the system administrator
CVRF361
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
CVRF361 NO MORE MEMORY SPACE CAN BE ALLOCATED. CONTACT THE SYSTEM ADMINISTRATOR
Meaning
The memory space limit defined by the system administrator has been
reached. No more memory space is available.
CVRF362
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
CVRF362 REQUESTED MEMORY AREA IS NOT SUFFICIENT
Meaning
A buffer of 16 KB is reserved to contain the input command line.
As long as a continuation character is found, the contents are appended
to this buffer.
Response
A command line with such a size is suspicious; verify whether this command
really works.
CVRF363
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
CVRF363 RECORDS OF ILLEGAL LENGTH ARE GENERATED: PROCESSING ABORTED
Meaning
Commands written to the output procedure must be split into records
whose length is lower than or equal to 72. The current record
processing fails because subrecords of length <= 0 or greater than
the record from which they were extracted are generated.
Response
First check the corresponding input command line or contact the
system administrator.
CVRF370
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
CVRF370 AT LEAST SDF V3 MUST BE INSTALLED
Meaning
- The data type FULL-FILENAME with wildcards can only be evaluated with
the SDF V3 builtin function CMDVAL.
- The INVARIANT-INPUT form can only be generated as of SDF V3.
Response
Contact the system administrator.
CVR0001
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CVR0001 SDF-CONV VERSION '(&00)' STARTED
CVR0060
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
CVR0060 SDF-CONV VERSION '(&00)' READY
Meaning
The program is ready to perform (another) conversion and is waiting for
(further) statements.
CVR0061
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
CVR0061 CPU TIME LIMIT REACHED DURING PROGRAM EXECUTION
CVR1000
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
CVR1000 CONVERSION TERMINATED WITH:
Meaning
Every conversion ends with a detailed error log.
CVR1000 introduces the messages CVR1001 through CVR1004.
CVR1001
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
CVR1001 FAILURES: (&00)
Meaning
Number of serious errors. When such error occur, the error messages are
not only output to SYSLST but also to SYSOUT.
The SDF-CONV conversion run is aborted when such errors messages are
reported.
CVR1002
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
CVR1002 ERRORS : (&00)
Meaning
Number of reported errors. When such errors occur, the error messages are
not only output to SYSLST but also to SYSOUT.
The SDF-CONV conversion run is aborted when error messages are reported.
CVR1003
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
CVR1003 WARNINGS: (&00)
Meaning
Number of warnings.
CVR1004
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
CVR1004 NOTES : (&00)
Meaning
Number of notes.
CVR1010
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
CVR1010 OPTIONS IN EFFECT:
Meaning
The operand values used for conversion are logged to SYSLST ahead of
each conversion log.
CVR1010 introduces the messages CVR1011 through CVR1023.
CVR1011
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
CVR1011 FROM-FILE = (&00)
Meaning
See message CVR1010.
CVR1012
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
CVR1012 EXPECT-CONTINUATION = (&00)-MODE
Meaning
See message CVR1010.
CVR1013
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
CVR1013 PARAMETER-LINES = (&00)
Meaning
See message CVR1010.
CVR1014
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
CVR1014 TO-FILE = (&00)
Meaning
See message CVR1010.
CVR1015
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
CVR1015 PRODUCE-CONTINUATION = (&00)-MODE
Meaning
See message CVR1010.
CVR1016
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
CVR1016 REPLACE-OLD-FILE = (&00)
Meaning
See message CVR1010.
CVR1017
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
CVR1017 SYSTEM-SYNTAX-FILE = (&00)
Meaning
See message CVR1010.
CVR1018
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
CVR1018 GROUP-SYNTAX-FILE = (&00)
Meaning
See message CVR1010.
CVR1019
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
CVR1019 UNCHANGED-CMD = (&00)
Meaning
See message CVR1010.
CVR102A
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
CVR102A PROCESSING OF LIBRARY '(&00)' COMPLETED
Meaning
(&00): library name.
CVR1020
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
CVR1020 DOCUMENTATION = (&00)
Meaning
See message CVR1010.
CVR1021
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
CVR1021 TARGET-VERSION = (&00)
Meaning
See message CVR1010.
CVR1022
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
CVR1022 OUTPUT-FORM = (&00)
Meaning
See message CVR1010.
CVR1023
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
CVR1023 PROCEDURE-FORMAT = (&00)
Meaning
See message CVR1010
CVR1029
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
CVR1029 PROCESSING OF LIBRARY ELEMENT '(&00)' OF VERSION '(&01)'
CVR2000
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
CVR2000 INPUT CATALOG COMMAND CAN NEVER BE EXECUTED BECAUSE BOTH BASIC-ACL AND GEN (OR DISP, FIRST, BASE) ARE SPECIFIED. COMMAND CANNOT BE CONVERTED
CVR2001
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
CVR2001 INPUT CATALOG COMMAND CAN ONLY BE EXECUTED ON NON-FGG FILES, PROVIDED NEW FILE NAME (RENAMING) IS SPECIFIED. IN THIS CASE, GENERATION OPERANDS ARE IGNORED AND COMMAND IS CONVERTED TO /MODIFY-FILE-ATTR