Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
COO0001 PARAMETER ERROR WHEN CALLING AN INTERNAL INTERFACE. SERSLOG ENTRY CREATED. CONTACT SYSTEM ADMINISTRATOR
Meaning
An internal interface has been called with an invalid parameter list.
For a more detailed diagnosis an entry has been written into
the SERSLOG file.
Response
The system administrator should analyze the SERSLOG entries COO0001
and COO0002.
COO0002
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
COO0002 INTERNAL ERROR. SERSLOG ENTRY CREATED. CONTACT SYSTEM ADMINISTRATOR
Meaning
For a more detailed diagnosis an entry has been written into
the SERSLOG file.
Response
The system administrator should analyze the SERSLOG entries COO0001
and COO0002.
COO3000
Destination: USER-TASK Routing code: Weight: 99
Warranty : YES
COO3000 FUNCTION WITHDRAWN BY CALLER
Meaning
A query was answered with 'T' (Terminate).
The job last displayed was not executed.
COO3001
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
COO3001 WARNING: RULE CONTAINER '(&00)' HAS BEEN DELETED
Meaning
The rule container has been deleted, because it did not contain
any more rules.
(&00): Fully qualified name of the rule container.
COO3002
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
COO3002 WARNING: DURING PROCESSING WITH WILDCARDS SOME RULE CONTAINERS HAVE BEEN DELETED
Meaning
One or more of the rule containers specified by wildcards have
been deleted, because they did not contain any more rules.
COO3003
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
COO3003 WARNING: PROCESSING WITH WILDCARDS NOT COMPLETELY PERFORMED
Meaning
Not all rule containers specified by wildcards could be
processed without errors.
COO3004
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
COO3004 WARNING: PROCESSING WITH WILDCARDS NOT COMPLETELY PERFORMED. SOME RULE CONTAINERS HAVE BEEN DELETED
Meaning
Not all rule containers specified by wildcards could be processed
without errors. One or more rule containers have been deleted,
because they did not contain any more rules.
COO3100
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
COO3100 INVALID VALUE FOR OPERAND '(&00)'. FUNCTION NOT PROCESSED
Meaning
The specified operand value is not within the permitted range.
(&00): Defective operand
Response
Repeat the command or job using a valid operand value.
COO3200
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
COO3200 INTERNAL ERROR. SERSLOG ENTRY CREATED. CONTACT SYSTEM ADMINISTRATOR
Meaning
For a more detailed diagnosis an entry has been written into
the SERSLOG file.
Response
The system administrator should analyze the SERSLOG entries COO0001
and COO0002.
COO3300
Destination: USER-TASK Routing code: Weight: 99
Warranty : YES
COO3300 RULE CONTAINER '(&00)' DOES NOT EXIST. FUNCTION NOT PROCESSED
Meaning
(&00): Fully qualified name of the rule container
COO3301
Destination: USER-TASK Routing code: Weight: 99
Warranty : YES
COO3301 NO RULE CORRESPONDING TO SPECIFIED OPERANDS
COO3302
Destination: USER-TASK Routing code: Weight: 99
Warranty : YES
COO3302 USER NOT AUTHORIZED TO PERFORM FUNCTION
COO3303
Destination: USER-TASK Routing code: Weight: 99
Warranty : YES
COO3303 NO MORE SPACE FOR RULE '(&00)' IN RULE CONTAINER '(&01)'. FUNCTION NOT PROCESSED
Meaning
(&00): Name of the rule to be added
(&01): Fully qualified name of the rule container
COO3304
Destination: USER-TASK Routing code: Weight: 99
Warranty : YES
COO3304 NO RULE CONTAINER CORRESPONDING TO SPECIFIED OPERANDS
COO3305
Destination: USER-TASK Routing code: Weight: 99
Warranty : YES
COO3305 POSITION RULE '(&00)' NOT FOUND IN RULE CONTAINER '(&01)'. FUNCTION NOT PROCESSED
Meaning
(&00): Name of the specified position rule which has not been found
(&01): Fully qualified name of the rule container
COO3306
Destination: USER-TASK Routing code: Weight: 99
Warranty : YES
COO3306 GUARD '(&00)' HAS INVALID TYPE. FUNCTION NOT PROCESSED
Meaning
The specified guard has not the required type.
(&00): Name of the guard
Response
Check the guard type with command /SHOW-GUARD-ATTRIBUTES
and specify a guard of the correct type.
COO3307
Destination: USER-TASK Routing code: Weight: 99
Warranty : YES
COO3307 RULE '(&00)' ALREADY EXISTS IN RULE CONTAINER '(&01)'. FUNCTION NOT PROCESSED
Meaning
(&00): Name of the rule which exists already in the rule container
(&01): Fully qualified name of the rule container
COO3308
Destination: USER-TASK Routing code: Weight: 99
Warranty : YES
COO3308 UNKNOWN USER ID IN PATH NAME '(&00)'. FUNCTION NOT PROCESSED
Meaning
Possible reasons:
- The user ID does not exist.
- The user ID has been locked by the system administrator.
(&00): Fully qualified path name
COO3309
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
COO3309 RFA SUPPORT NOT IMPLEMENTED. FUNCTION NOT PROCESSED
COO3310
Destination: USER-TASK Routing code: Weight: 99
Warranty : YES
COO3310 RULE '(&00)' NOT FOUND IN RULE CONTAINER '(&01)'. FUNCTION NOT PROCESSED
Meaning
(&00): Name of the rule which has not been found
(&01): Fully qualified name of the rule container
COO3311
Destination: USER-TASK Routing code: Weight: 99
Warranty : YES
COO3311 CONDITION GUARD '(&00)' NOT ACCESSIBLE FOR OWNER OF RULE CONTAINER '(&01)'. FUNCTION NOT PROCESSED
Meaning
(&00): Name of the guard which contains the access conditions
(&01): Fully qualified name of the rule container
COO3312
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
COO3312 NO COOWNER ADMISSION RULE FOUND FOR OBJECT '(&00)'
Meaning
There is no matching rule for the object in the active rule container
of the object owner.
(&00): Name of the object
COO3313
Destination: USER-TASK Routing code: Weight: 99
Warranty : YES
COO3313 PUBSET IN PATH NAME '(&00)' NOT ACCESSIBLE. FUNCTION NOT PROCESSED
Meaning
The requested function cannot be processed as the system does not have
access to the specified pubset.
Possible reasons:
- There is no MSCF connection.
- The specified pubset is not a shared one.
- The specified pubset does not run under the management of GUARDS.
- The specified pubset is not imported.
(&00): Fully qualified guard name
Response
Correct the catalog ID or query the status of the pubset.
COO3314
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
COO3314 ERROR IN MRS COMMUNICATION FACILITY. FUNCTION NOT PROCESSED
Meaning
An error has occurred in the MRS communication facility (MSCF) when
accessing a remote system.
Response
Request the system administrator to check the MSCF connection.
In case of a temporary fault it will be useful to check whether
the job has already been processed or simply to repeat the job.
COO3315
Destination: USER-TASK Routing code: Weight: 99
Warranty : YES
COO3315 CAT ID IN PATH NAME '(&00)' NOT KNOWN TO LOCAL GUARDS MANAGEMENT. FUNCTION NOT PROCESSED
Meaning
(&00): Path name of a guard.
COO3316
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
COO3316 NO COOWNER PROTECTION ACTIVE
Meaning
There is no active rule container for the coowner protection.
COO3321
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
COO3321 USER GLOBAL RULE CONTAINER NOT ACCESSIBLE. FUNCTION NOT PROCESSED
COO3323
Destination: USER-TASK Routing code: Weight: 99
Warranty : YES
COO3323 SUBSYSTEM GUARDS NOT AVAILABLE ON REMOTE HOST
COO3900
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
COO3900 NO MEMORY AVAILABLE. RETRY FUNCTION LATER
Meaning
All the available system memory space has been used up.
Response
Contact the system administrator or reenter the command later.
COO3901
Destination: USER-TASK Routing code: Weight: 99
Warranty : YES
COO3901 GUARD '(&00)' IS LOCKED. RETRY FUNCTION LATER
Meaning
The Guard is being processed by another task and is therefore
locked.
(&00): Fully qualified guard name.
Response
Repeat command or job later.
COO3902
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
COO3902 GUARD TEMPORARILY INACCESSIBLE. RETRY FUNCTION LATER
Meaning
Possible reasons:
- The /CHANGE-GUARD-FILE function is being processed.
- A master change is taking place.
COO4000
Destination: USER-TASK Routing code: Weight: 98
Warranty : NO
COO4000 ADD RULE TO RULE CONTAINER '(&00)'? REPLY (Y/J=YES; N=NO; T/A=TERMINATE FUNCTION)
Meaning
The user can decide in interactive mode whether the rule shall be
added to the rule container (&00).
(&00): Name of the rule container.
Y/J: The rule shall be added to the rule container (&00).
N : The rule shall not be added to the rule container (&00).
T/A: The function is to be aborted.
In case of an empty or invalid reply this message appears again.
Response
Enter your reply in accordance with the "Meaning" text.
COO4001
Destination: USER-TASK Routing code: Weight: 98
Warranty : NO
COO4001 MODIFY RULE IN RULE CONTAINER '(&00)'? REPLY (Y/J=YES; N=NO; T/A=TERMINATE FUNCTION)
Meaning
The user can decide in interactive mode whether the rule in the
rule container (&00) shall be modified.
(&00): Name of the rule container.
Y/J: The rule in the rule container (&00) shall be modified.
N : The rule in the rule container (&00) shall not be modified.
T/A: The function is to be aborted.
In case of an empty or invalid reply this message appears again.
Response
Enter your reply in accordance with the "Meaning" text.
COO4002
Destination: USER-TASK Routing code: Weight: 98
Warranty : NO
COO4002 REMOVE RULE FROM RULE CONTAINER '(&00)'? REPLY (Y/J=YES; N=NO; T/A=TERMINATE FUNCTION)
Meaning
The user can decide in interactive mode whether the rule shall
be removed from the rule container (&00).
(&00): Name of the rule container.
Y/J: The rule shall be removed from the rule container (&00).
N : The rule shall not be removed from the rule container (&00).
T/A: The function is to be aborted.
In case of an empty or invalid reply this message appears again.
Response
Enter your reply in accordance with the "Meaning" text.
COO5000
Destination: CONSOLE Routing code: * (main console) Weight: 70
Warranty : NO
COO5000 '(&00)'
Meaning
(&00): This message is displayed only when a diagnostic REP
has been activated.
COO5001
Destination: CONSOLE Routing code: R Weight: 70
Warranty : NO
COO5001 ERROR '(&00)' DURING INITIALIZATION OF SUBSYSTEM '(&01)'. FUNCTION NOT PROCESSED
Meaning
The reason of the error can be identified by means of the error
class. A precise description can be found in the corresponding
SERSLOG entry.
(&00): Error class.
01: Error when reading the catalog ID of the home pubset
(internal interface $STAM).
02: Error during registration of the guard type
(internal interface $PROREG).
03: Error when ascertaining the HSI-Base
(internal interface $SYSINF).
04 Error when ascertaining the running OSD-Version
(internal interface $SYSINF).
(&01): Subsystem name.
COO5002
Destination: CONSOLE Routing code: * (main console) Weight: 70
Warranty : NO
COO5002 GUARDCOO: INTERNAL ERROR '(&00)' REPORTED FROM '(&01)'
Meaning
For a detailed diagnosis an entry has been written into the SERSLOG file.
If 'fault intolerance' is set, a diagnostic dump is offered.
(&00): Short designation of the defective interface or of the error.
(&01): Address of the defective GUARDCOO function.
Response
Contact the system administrator or the diagnostic staff.
COO5003
Destination: CONSOLE Routing code: R Weight: 70
Warranty : NO
COO5003 NO SERSLOG ENTRY POSSIBLE DUE TO AN INTERNAL ERROR IN MODULE '(&00)'
Meaning
It is not possible to write an entry into the SERSLOG file because the
type of the entry is unknown in module (&00).
(&00): Name of a module of the subsystem GUARDCOO.
Response
Contact the system administrator or the diagnostic staff.