Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD1001 PROGRAM ERROR (&00) IN MODULE GCLDCMD.
Meaning
An internal error was detected during program execution.
Program error code: (&00).
Response
Contact the system administrator; collect diagnostic material
and pass it on to the system diagnostics staff.
CLD1002
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD1002 MSG7 ERROR X'(&00)' DURING OUTPUT OF MESSAGE (&01).
Meaning
During message output with MSG7 macro was an error detected;
macro return code: (&00).
Response
Contact the system administrator; collect diagnostic material
and pass it on to the system diagnostics staff.
CLD1003
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD1003 ERROR IN '(&00)' MACRO. ERROR CODE: '(&01)'.
Meaning
An error occurred when using a system macro.
The SHOW-CALENDAR command is terminated with an error.
Macro name: (&00)
Error code of the macro: (&01).
Response
Determine the precise nature of the error by reference
to the BS2000 manual Executive Macros and take the
appropriate remedial action.
CLD1004
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD1004 INTERNAL WORKING AREA OF MODULE GCLDCMD IS TOO SMALL.
Meaning
The internal working area of the module GCLDCMD cannot store
the information required during processing.
Response
Contact the system administrator; collect diagnostic material
and pass it on to the system diagnostics staff.
CLD1005
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD1005 INTERNAL DATA-AREA FOR MODULE GCLDCMD COULD NOT BE REQUESTED.
Meaning
The internal data structure cannot be created because the
internal data area could not be requested by $GETMEM.
Response
Contact the system administrator; collect diagnostic material
and pass it on to the system diagnostics staff.
CLD1007
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD1007 ADDRESS OF PARAMETER LIST OF CALENDAR SVC NOT ACCESSIBLE
Meaning
The address of the parameter list used for the call of the
CALENDR interface (SVC 193) is not sufficiently accessible.
Response
Assure that the address is accessible from TU and that the
standard header returncode can be overwritten.
CLD1011
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD1011 START DATE IS GREATER THAN END DATE.
Meaning
The date in the FROM operand is after the date
in the TO operand.
Response
Correct and retry.
CLD1012
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD1012 NAME OF SYMBOLIC DATE IS NOT CORRECT.
Meaning
The name does not comply with the naming convention.
Response
Correct the name and retry.
CLD1013
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD1013 NAME OF THE HOLIDAY IS NOT CORRECT.
Meaning
The name does not comply with the naming convention.
Response
Correct the name and retry.
CLD1014
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD1014 START DATE IS NOT WITHIN THE CALENDAR LIMITS.
Meaning
The date of the FROM operand is either before the start date or
after the end date of the calendar.
Response
Correct the date and retry.
CLD1015
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD1015 END DATE IS NOT WITHIN THE CALENDAR LIMITS.
Meaning
The date of the TO operand is either before the start date
or after the end date of the calendar.
Response
Correct the date and retry.
CLD1016
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD1016 SYMBOLIC DATE RANGE INCORRECT: FIRST NAME IS GREATER THAN SECOND NAME.
Meaning
The first name of the symbolic date (FROM operand) is greater
than the second name (TO operand).
Response
Correct the name and retry.
CLD1017
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD1017 HOLIDAY RANGE INCORRECT: FIRST NAME IS GREATER THAN SECOND NAME.
Meaning
The first holiday name (FROM operand) is greater than the
second name (TO operand).
Response
Correct the name and retry.
CLD1021
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD1021 INTERNAL PARAMETER ERROR WITH CALENDAR SUBSYSTEM: NO DATA SUPPLIED.
Meaning
Because of an internal interface error with the calendar
subsystem no data was received from the calendar file.
Response
Contact the system administrator; collect diagnostic material
and pass it on to the system diagnostics staff.
CLD1022
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD1022 INTERNAL PARAMETER ERROR WITH CALENDAR SUBSYSTEM: NOT ALL DATA SUPPLIED.
Meaning
Because of an internal interface error not all data
was received from the calendar file.
Response
Contact the system administrator; collect diagnostic material
and pass it on to the system diagnostics staff.
CLD1031
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD1031 CALENDAR '(&00)' DOES NOT EXIST.
Meaning
The requested calendar could not be found.
Response
Correct and retry.
CLD1032
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD1032 DMS ERROR DURING ACCESSING THE CALENDAR '(&00)'. ERRORCODE '(&01)'.
Meaning
DMS error (&01) occurred when accessing the calendar file (&00).
Response
For more detailed information about the DMS error code enter the SDF
HELP-MSG command in system mode or refer the BS2000 manual
'System Messages' or one of the BS2000 DMS manuals.
CLD1033
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD1033 FILE '(&00)' IS NOT A CALENDAR.
Meaning
The requested calendar does not have the internal structure of
a calendar file.
Response
Correct and retry.
CLD1034
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD1034 CALENDAR '(&00)' IS INCONSISTENT.
Meaning
The internal structure of the specified calendar does not correspond
to the expected structure.
Response
Contact the system administrator; collect diagnostic material
and pass it on to the system diagnostics staff.
CLD1035
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD1035 NOT ENOUGH MEMORY AVAILABLE FOR THE CALENDAR SUBSYSTEM.
Meaning
The calendar subsystem could not get enough memory.
Response
Contact the system administrator; collect diagnostic material
and pass it on to the system diagnostics staff.
CLD1036
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD1036 INVALID DATE.
Meaning
The given date is syntactically incorrect.
Response
Correct and retry.
CLD1041
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD1041 CALENDAR '(&00)' HAS NO DAYS.
Meaning
The requested calendar has no days.
Response
Check the calendar file and correct, if necessary.
CLD1042
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD1042 CALENDAR '(&00)' HAS NO SYMBOLIC DATES.
Meaning
The requested calendar has no symbolic dates.
Response
Check the calendar file and correct, if necessary.
CLD1043
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD1043 CALENDAR '(&00)' HAS NO HOLIDAYS.
Meaning
The requested calendar has no holidays.
Response
Check the calendar file and correct, if necessary.
CLD1044
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD1044 NO SYMBOLIC DATES IN THE SELECTED RANGE.
Meaning
There are no symbolic dates between start date and end date.
Response
Correct (if necessary) and retry.
CLD1045
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD1045 NO HOLIDAYS IN THE SELECTED RANGE.
Meaning
There are no holidays between start date and end date.
Response
Correct (if necessary) and retry.
CLD2001
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD2001 DATE GIVEN IN GOTO FIELD BEFORE BEGIN OF CALENDAR.
CLD2002
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD2002 DATE GIVEN IN GOTO FIELD AFTER END OF CALENDAR.
CLD2003
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD2003 SYMDAT NAME GIVEN IN GOTO FIELD BEFORE FIRST SYMDAT.
CLD2004
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD2004 SYMDAT NAME GIVEN IN GOTO FIELD AFTER LAST SYMDAT.
CLD2005
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD2005 HOLIDAY NAME GIVEN IN GOTO FIELD BEFORE FIRST HOLIDAY.
CLD2006
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD2006 HOLIDAY NAME GIVEN IN GOTO FIELD AFTER LAST HOLIDAY.
CLD2007
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD2007 CALENDAR SUCCESSFULLY OPENED.
CLD2008
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD2008 GIVEN GOTO FIELD DOES NOT EXIST. NEXT ELEMENT WAS TAKEN.
CLD2009
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD2009 CALENDAR NAME MISSING.
Meaning
A calendar name is required for opening / creating a calendar.
Response
Enter calendar name.
CLD2010
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD2010 CALENDAR CLOSED.
CLD2011
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD2011 TIME GIVEN IN GOTO FIELD BEFORE FIRST TIME.
CLD2012
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD2012 TIME GIVEN IN GOTO FIELD AFTER LAST TIME.
CLD2013
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD2013 DATE GIVEN IN GOTO FIELD BEFORE FIRST ASSIGNED DAY.
CLD2014
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD2014 START DATE GREATER THAN END DATE.
Meaning
The start date must be before or the same as the end date.
Response
Change start date or end date.
CLD2015
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD2015 TIME BETWEEN CALENDAR LIMITS EXCEEDS FIVE YEARS.
Meaning
A calendar must not cover more than five years.
Response
Change start or end date.
CLD2016
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD2016 DATE GIVEN IN GOTO FIELD AFTER LAST ASSIGNED DAY.
CLD2017
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD2017 INVALID TIME GIVEN.
Meaning
Invalid time given.
Response
Enter correct time.
CLD2018
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD2018 NEW CALENDAR LIMITS OUTSIDE OF OLD LIMITS.
Meaning
The limits of the calendar must be modified overlapping.
The new start date must not be greater than the old end date,
the new end date not smaller than the old start date.
Response
Change start date or end date.
CLD2021
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD2021 INVALID DATE GIVEN.
Meaning
An invalid date was given.
Response
Enter correct date.
CLD2022
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD2022 INVALID NAME FOR SYMDAT OR HOLIDAY.
Meaning
Name of SYMDAT or holiday is invalid.
Response
Enter correct name.
CLD2023
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD2023 GIVEN DATE OUTSIDE LIMITS OF CALENDAR.
Meaning
The date has to be inside the limits of the calendar.
Response
Enter correct date.
CLD2030
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD2030 CYCLE VALUE INVALID OR TOO LARGE.
Meaning
The cycle value is invalid or too large.
Response
Enter correct cycle value.
CLD2038
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD2038 WRONG KEY PRESSED. DUE/ENTER EXPECTED.
Meaning
Only DUE/ENTER are allowed on this screen. No function keys
are allowed.
Response
PRESS DUE/ENTER.
CLD2039
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD2039 WRONG FUNCTION. NUMBER 1 OR 5 EXPECTED.
Meaning
An invalid number was entered.
Response
Choose correct function.
CLD2040
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD2040 WRONG OPEN MODE GIVEN. R(EAD)/U(PDATE)/C(REATE) EXPECTED.
Meaning
Illegal value entered for OPENMODE.
Response
Choose correct OPENMODE.
CLD2041
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD2041 SAVE EXECUTED.
CLD2042
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD2042 WRONG FUNCTION GIVEN. NUMBER 1-5 EXPECTED.
Meaning
An invalid number was entered.
Response
Choose correct function.
CLD2043
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD2043 SAVE CANNOT BE USED WHEN CALENDAR IS OPENED WITH OPENMODE READ.
Meaning
The calendar cannot be saved since it was opened with
OPENMODE READ.
Response
No need to save calendar since no change can be made with
OPENDMODE READ.
CLD2044
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD2044 WRONG SELECTION FOR SAVE AT CLOSE. Y/N EXPECTED.
Meaning
Invalid SAVE parameter for CLOSE function.
Response
Choose Y to save, N not to save the calendar.
CLD2045
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD2045 CLOSE WITH SAVE PARAMETER YES NOT PERMITTED WITH OPENMODE READ.
Meaning
The calendar cannot be saved since it was opened with OPENMODE READ.
Response
Enter SAVE parameter NO.
CLD2046
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD2046 WRONG FUNCTION GIVEN. NUMBER 1-5 EXPECTED.
Meaning
An invalid number was entered.
Response
Choose correct function.
CLD2047
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD2047 EDIT EXECUTED.
CLD2048
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD2048 WRONG MONTH.
Meaning
The month is invalid.
Response
Enter correct month.
CLD2049
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD2049 WRONG DAY.
Meaning
The day is invalid.
Response
Enter correct day.
CLD2050
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD2050 MONTH DOES NOT HAVE SO MANY DAYS.
Meaning
The given month does not have so many days.
Response
Correct day or month.
CLD2051
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD2051 A NAME MUST NOT CONTAIN "..".
Meaning
A name must not contain two successive periods.
Response
Enter correct name.
CLD2052
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD2052 INVALID MARKING. C/D NOT ALLOWED FOR DAYS.
Meaning
Days cannot be copied or deleted.
Response
Use another character to mark a day.
CLD2053
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD2053 WRONG KEY PRESSED FOR DATA TRANSFER.
Meaning
The following keys may be used: DUE/ENTER/F7/F8/F12/F13.
Response
Use a valid key.
CLD2054
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD2054 A NAME MUST NOT END WITH ".".
Meaning
A name must not end with a period.
Response
Enter correct name.
CLD2055
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD2055 NAME CONTAINS ILLEGAL CHARACTERS.
Meaning
The name contains illegal characters.
Response
Enter correct name.
CLD2056
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD2056 NAME BEGINS WITH AN ILLEGAL CHARACTER.
Meaning
The first character of the name is illegal.
Response
Enter correct name.
CLD2057
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD2057 NOT A LEAP YEAR AND "02-29" GIVEN.
Meaning
The given year is not a leap year. February 29th does not exist
in this year.
Response
Enter correct date.
CLD2058
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD2058 NO SYMDATS DEFINED.
CLD2059
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD2059 NO HOLIDAYS DEFINED.
CLD2060
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD2060 INVALID KEY. DUE/ENTER/F12/F13 EXPECTED.
Meaning
Valid keys: DUE/ENTER/F12/F13.
Response
Press DUE/ENTER/F12/F13.
CLD2061
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD2061 ILLEGAL STATEMENT. EMPTY/-/+/F7/F8/F12/F13 EXPECTED.
Meaning
Invalid contents in STATEMENT field.
Response
Enter correct statement.
CLD2062
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD2062 THE DATE MUST BE FULLY QUALIFIED.
Meaning
The date must be fully qualified.
Response
Enter correct date.
CLD2063
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD2063 ACTIVE FIELD WRONG: Y/N EXPECTED.
Meaning
The ACTIVE field contains an illegal value.
Response
Enter correct ACTIVE field.
CLD2064
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD2064 WRONG KEY. DUE/ENTER/F7/F8/F12/F13 EXPECTED.
Meaning
Invalid contents in STATEMENT field.
Response
Enter correct statement.
CLD2065
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD2065 ATTRIBUTE EMPTY/WRONG. W/F EXPECTED.
Meaning
W and F allowed for attribute.
Response
Enter correct attribute.
CLD2066
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD2066 HOURS INVALID.
Meaning
The given hours are invalid.
Response
Enter correct hours.
CLD2067
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD2067 MINUTES INVALID.
Meaning
The given minutes are invalid.
Response
Enter correct minutes.
CLD2068
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD2068 SECONDS INVALID.
Meaning
The given seconds are invalid.
Response
Enter correct seconds.
CLD2069
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD2069 TIME MUST BE FULLY QUALIFIED.
Meaning
The time must be fully qualified.
Response
Enter correct time.
CLD2070
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD2070 SEVERE PROGRAM ERROR. ONLY CLOSE AND EXIT ARE AVAILABLE.
Meaning
Severe program error. Only CLOSE and EXIT are available.
Response
Close calendar if a calendar is opened. Then exit calendar
editor and start calendar editor again.
CLD2071
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD2071 START DATE OF CYCLE MISSING.
Meaning
The start date of cycle was not given.
Response
Enter start date of cycle.
CLD2072
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD2072 BASIC INFORMATION CHANGED.
CLD2073
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD2073 LIMIT OF CALENDAR BEFORE 1970.
Meaning
A date before 1970 was given for a limit of the calendar.
Response
Enter correct date.
CLD2074
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD2074 LIMIT OF CALENDAR AFTER 2030.
Meaning
A date after 2030 was given for a limit of the calendar.
Response
Enter correct date.
CLD2075
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD2075 CYCLE START/END MUST BE FULLY QUALIFIED
Meaning
The date for cycle start/end must be fully qualified
(year month day).
Response
Enter fully qualified date.
CLD2076
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD2076 WRONG FUNCTION GIVEN. EDIT/SAVE/CLOSE EXPECTED.
Meaning
A calendar is opened. Choose EDIT/SAVE/CLOSE.
Response
Choose EDIT/SAVE/CLOSE.
CLD2077
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD2077 WRONG STATEMENT. EMPTY/F12/F13 EXPECTED.
Meaning
Invalid contents in STATEMENT field.
Response
Enter correct statement
CLD2078
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD2078 WRONG ATTRIBUTE. W/F/S EXPECTED.
Meaning
W, F and S allowed for attribute.
Response
Enter correct attribute.
CLD2079
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD2079 GOTO FIELD INVALID OR NOT WITHIN LIMITS OF CALENDAR.
Meaning
The date in the GOTO field is invalid or not within the limits
of the calendar.
Response
Enter correct GOTO field.
CLD2080
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD2080 ERROR AT BIND MACRO; RETCODE="'(&00)'". PROGRAM ABORTED.
Meaning
An error occurred when using the BIND macro.
The Calendar Editor is terminated with an error.
Error code of the macro: (&01).
Response
Determine the precise nature of the error by reference
to the BS2000 manual Executive Macros and take the
appropriate remedial action.
CLD2081
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD2081 GOTO FIELD INVALID.
Meaning
The GOTO field contains an invalid name.
Response
Enter correct GOTO field.
CLD2082
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD2082 GOTOTIME FIELD INVALID.
Meaning
The GOTOTIME field contains an invalid time.
Response
Enter correct GOTOTIME field.
CLD2083
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD2083 CHANGE ORDER FIELD WRONG. S/T EXPECTED.
Meaning
The CHANGE ORDER field contains an illegal value.
Response
Enter correct CHANGE ORDER field.
CLD2084
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD2084 END OF TABLE REACHED.
CLD2085
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD2085 START OF TABLE REACHED.
CLD2086
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD2086 SYMDAT GIVEN IN GOTO FIELD DOES NOT EXIST.
Meaning
The SYMDAT given in the GOTO field does not exist.
Response
Choose another SYMDAT or give SYMDAT with wildcard syntax.
CLD2087
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD2087 TIME GIVEN IN GOTOTIME FIELD NOT FOUND.
Meaning
No SYMDAT found with the TIME given in GOTOTIME field.
Response
Choose another time.
CLD2088
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD2088 NEW NOT ALLOWED. CALENDAR OPENED WITH OPENMODE READ.
Meaning
A new SYMDAT / holiday cannot be created in OPENMODE READ.
Response
Close calendar and open with OPENMODE UPDATE.
CLD2089
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD2089 LIB='(&00)',ELEM='(&01)'.
CLD2090
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD2090 MARKING INVALID. C/D INVALID WITH OPENMODE READ
Meaning
Copy and delete are not allowed in OPENMODE READ.
Response
Enter correct marking or open calendar with OPENMODE UPDATE.
CLD2091
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD2091 SYMDAT ALREADY EXISTS.
Meaning
The SYMDAT already exists and cannot be created.
Response
Modify existing SYMDAT or choose another name for a new SYMDAT.
CLD2092
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD2092 CYCLE VALUE CANNOT BE GIVEN FOR NON-CYCLIC SYMDAT.
Meaning
A non-cyclic SYMDAT cannot have a cycle value.
Response
Delete cycle value.
CLD2093
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD2093 CYCLE TYPE CANNOT BE GIVEN FOR NON-CYCLIC SYMDAT.
Meaning
A non-cyclic SYMDAT cannot have a cycle type.
Response
Delete cycle type.
CLD2094
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD2094 CYCLE ALTERNATIVE CANNOT BE GIVEN FOR NON-CYCLIC SYMDAT.
Meaning
A non-cyclic SYMDAT cannot have a cycle alternative.
Response
Delete cycle alternative.
CLD2095
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD2095 CYCLE START CANNOT BE GIVEN FOR NON-CYCLIC SYMDAT.
Meaning
A non-cyclic SYMDAT cannot have a cycle start.
Response
Delete cycle start.
CLD2096
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD2096 CYCLE END CANNOT BE GIVEN FOR NON-CYCLIC SYMDAT.
Meaning
A non-cyclic SYMDAT cannot have a cycle end.
Response
Delete cycle end.
CLD2097
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD2097 SINGLE DAYS CANNOT BE ASSIGNED FOR CYCLIC SYMDAT.
Meaning
The days assigned to a cyclic SYMDAT are calculated automatically.
Single days cannot be assigned to a cyclic SYMDAT.
Response
Delete assignment of days.
CLD2098
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD2098 TIME INVALID.
Meaning
Time invalid.
Response
Enter correct time.
CLD2099
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD2099 CYCLE VALUE MUST CONSIST OF DIGITS ONLY.
Meaning
The cycle value must consist of digits only.
Response
Enter correct cycle value.
CLD2100
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD2100 CYCLE TYPE INVALID. DIGITS 1-4 EXPECTED.
Meaning
The cycle type is invalid.
Response
Enter correct cycle type.
CLD2101
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD2101 CYCLE ALTERNATIVE INVALID. DIGITS 1-4 EXPECTED.
Meaning
The cycle alternative is invalid.
Response
Enter correct cycle alternative.
CLD2102
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD2102 DATE FOR CYCLE START INVALID.
Meaning
The date of the cycle start is invalid.
Response
Enter correct date for cycle start.
CLD2103
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD2103 DATE FOR CYCLE END INVALID.
Meaning
The date of the cycle end is invalid.
Response
Enter correct date for cycle end.
CLD2104
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD2104 CYCLE START after CYCLE END.
Meaning
Date of cycle start after cycle end.
Response
Correct cycle start or cycle end.
CLD2105
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD2105 ZEROES ARE REQUIRED TO DELETE AN ASSIGNED DAY.
Meaning
The assignment of a day to a non-cyclic SYMDAT / holiday is
deleted by overwriting the day with zeroes.
Response
Delete assigned date by overwriting with zeroes.
CLD2106
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD2106 NUMERIC FIELD MUST CONTAIN DIGITS ONLY.
Meaning
A numeric field must contain digits only.
Response
Correct entry in numeric field.
CLD2107
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD2107 NEWLY ENTERED DATE INVALID OR NOT WITHIN LIMITS OF CALENDAR.
Meaning
The date of a day to be assigned to a non-cyclic
SYMDAT / holiday is invalid or outside of the calendar limits.
Response
Enter correct date.
CLD2108
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD2108 PLEASE DEFINE A NEW SYMDAT.
Meaning
Please enter a new name for SYMDAT.
Response
Define a new SYMDAT.
CLD2109
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD2109 PLEASE OVERWRITE OLD SYMDAT NAME.
Meaning
The old SYMDAT name is shown. Please enter a new name.
Response
Enter new SYMDAT name.
CLD2110
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD2110 YEAR MISSING. MONTH PRESENT.
Meaning
The month was entered, the year is missing.
Response
Enter year.
CLD2111
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD2111 YEAR/MONTH MISSING. DAY PRESENT.
Meaning
The day was entered, the year or the month is missing.
Response
Enter year and/or month.
CLD2112
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD2112 HOURS MISSING. MINUTES PRESENT.
Meaning
The minutes were entered, the hour is missing.
Response
Enter hours.
CLD2113
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD2113 HOURS/MINUTES MISSING. SECONDS PRESENT.
Meaning
The seconds were entered. The hours or minutes are missing.
Response
Enter hours and/or minutes.
CLD2114
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD2114 WRONG FUNCTION. OPEN WITHOUT CLOSE ONLY FOR OPENMODE READ.
Meaning
CLOSE is required if the calendar was not opened with OPENMODE READ.
Response
Close calendar, then open another calendar.
CLD2115
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD2115 GIVEN SYMDAT DOES NOT EXIST.
Meaning
The given SYMDAT does not exist.
Response
Create SYMDAT or enter another name.
CLD2116
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD2116 GIVEN HOLIDAY DOES NOT EXIST.
Meaning
The given holiday does not exist.
Response
Create holiday or enter another name.
CLD2117
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD2117 NO HOLIDAYS DEFINED.
CLD2118
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD2118 INVALID HOLIDAY NAME.
Meaning
The name of the holiday is invalid.
Response
Enter correct holiday name.
CLD2119
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD2119 HOLIDAY ALREADY EXISTS.
Meaning
The holiday already exists and cannot be created.
Response
Modify existing holiday or choose another name for new holiday.
CLD2120
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD2120 TYPE OF HOLIDAY INVALID. N/C EXCPECTED.
Meaning
Type of holiday invalid.
Response
Enter correct holiday type.
CLD2121
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD2121 CYCLE DATE CANNOT BE GIVEN FOR NON-CYCLIC HOLIDAY.
Meaning
A non-cyclic holiday cannot have a cycle date.
Response
Delete cycle date.
CLD2122
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD2122 DAYS CANNOT BE ASSIGNED TO A CYCLIC HOLIDAY.
Meaning
The days assigned to a cyclic holiday are calculated automatically.
Single days cannot be assigned to a cyclic holiday.
Response
Delete assignment of days.
CLD2123
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD2123 CYCLE DATE INVALID.
Meaning
The cycle date is invalid.
Response
Enter correct date.
CLD2124
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD2124 PLEASE OVERWRITE OLD HOLIDAY NAME.
Meaning
The old holiday name is shown. Please enter a new name.
Response
Enter new holiday name.
CLD2125
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD2125 PLEASE DEFINE A NEW HOLIDAY.
Meaning
Please enter a new name for holiday.
Response
Define a new holiday.
CLD2127
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD2127 ERROR AT FHS OPEN.
Meaning
Internal error in the calendar editor. An error occurred during
initialization of formatting.
Response
Contact the system administrator; collect diagnostic material
and pass it on to the system diagnostics staff.
CLD2128
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD2128 WRONG FHS OPERATION CODE (=X'(&00)').
Meaning
Internal error in the calendar editor. An invalid operation
code was passed to formatting.
Response
Contact the system administrator; collect diagnostic material
and pass it on to the system diagnostics staff.
CLD2129
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD2129 ERROR AT SAVE/CLOSE. ONLY SAVE/CLOSE/EXIT ALLOWED.
Meaning
An error has occurred at SAVE/CLOSE. Only the functions
SAVE/CLOSE/EXIT are allowed.
Response
Choose function SAVE/CLOSE/EXIT.
CLD2130
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD2130 SYMDAT TYPE WRONG. N/C EXPECTED.
Meaning
The type of the SYMDAT is invalid.
Response
Enter correct SYMDAT type.
CLD2131
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD2131 PARAMETER ERROR AT FUNCTION '(&00)'.
Meaning
Internal error in the calendar editor. Invalid data was
passed to the function (&00).
Response
Contact the system administrator; collect diagnostic material
and pass it on to the system diagnostics staff.
CLD2132
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD2132 CALENDAR ALREADY EXISTS.
Meaning
The calendar already exists and cannot be created.
Response
Choose another name for calendar or use OPENMODE=UPDATE.
CLD2133
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD2133 GIVEN CALENDAR DOES NOT EXIST.
Meaning
The calendar does not exist.
Response
Choose an existing calendar or create a new calendar.
CLD2134
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD2134 DMS ERROR '(&00)' ON ACCESS TO CALENDAR FILE.
Meaning
DMS Error: (&00) occurred when accessing the calendar.
Response
Take appropriate action in accordance with the DMS error code.
CLD2135
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD2135 FILE IS NOT A CALENDAR.
Meaning
The file does exist but is not a calendar file.
Response
Enter correct filename of a calendar file.
CLD2136
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD2136 CALENDAR IS INCONSISTENT.
Meaning
The internal structure of the given calendar is inconsistent.
CLD2137
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD2137 CALENDAR ALREADY OPENED BY ANOTHER USER. OPENMODE=UPDATE IMPOSSIBLE.
Meaning
Another user is modifying the calendar.
Response
Choose OPENMODE=READ or retry later.
CLD2138
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD2138 WARNING: HOLIDAY FILE DOES NOT EXIST.
Meaning
The holiday file does not exist. The predefined holidays could
not be inserted.
Response
Find out why the holiday file is not available (erased
/ renamed). Make holiday file available, then create calendar
again or define holidays manually.
CLD2139
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD2139 DMS ERROR '(&00)' AT OPEN OF HOLIDAY FILE.
Meaning
DMS error: (&00) occurred when opening the holiday file.
Response
Take appropriate action in accordance with the DMS error code.
CLD2140
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD2140 TOO MANY DAYS BETWEEN LIMITS OF CALENDAR.
Meaning
A calendar must not cover more than five years.
Response
Change start or end date.
CLD2141
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD2141 END DATE BEFORE START DATE.
Meaning
The given end date is before the start date.
Response
Enter correct start date and end date.
CLD2142
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD2142 FUNCTION '(&00)': OUT OF MEMORY.
Meaning
Additional memory was requested by the function (&00).
No more memory was available.
Response
Retry later.
CLD2143
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD2143 FUNCTION '(&00)': CONTROL BLOCK INVALID. PROGRAM IMMEDIATLY ABORTED.
Meaning
Internal error in the calendar editor. An invalid control block
was used when calling function (&00).
The program is immediately aborted.
Response
Contact the system administrator; collect diagnostic material
and pass it on to the system diagnostics staff.
CLD2144
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD2144 DATE OUT OF LIMITS OF CALENDAR.
Meaning
Date must be within the limits of the calendar.
Response
Enter correct date.
CLD2145
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD2145 THE SYMDAT ALREADY EXISTS.
Meaning
The SYMDAT already exists and cannot be created.
Response
Modify existing SYMDAT or choose another name for new SYMDAT.
CLD2146
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD2146 SELECTED SYMDAT DOES NOT EXIST.
Meaning
The given SYMDAT does not exist.
Response
Choose an existing SYMDAT or create a new SYMDAT.
CLD2147
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD2147 CYCLIC SYMDAT CANNOT BE CHANGED TO NON-CYCLIC.
CLD2148
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD2148 NON-CYCLIC SYMDAT CANNOT BE CHANGED TO CYCLIC.
CLD2149
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD2149 DATE ALREADY ASSIGNED.
CLD2150
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD2150 DATE NOT ALLOCATED. DATE CANNOT BE DEALLOCATED.
CLD2151
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD2151 FUNCTION: '(&00)'. INVALID DATE PASSED.
Meaning
Internal error in the calendar editor. An invalid date
was passed when calling function (&00).
Response
Contact the system administrator; collect diagnostic material
and pass it on to the system diagnostics staff.
CLD2152
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD2152 HOLIDAY ALREADY EXISTS.
Meaning
The holiday already exists and cannot be created.
Response
Modify existing holiday or choose another name for new holiday.
CLD2153
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD2153 SELECTED HOLIDAY DOES NOT EXIST.
Meaning
The given holiday does not exist.
Response
Choose an existing holiday or create this holiday.
CLD2154
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD2154 CYCLIC HOLIDAY CANNOT BE CHANGED TO NON-CYCLIC.
CLD2155
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD2155 NON-CYCLIC HOLIDAY CANNOT BE CHANGED TO CYCLIC.
CLD2156
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD2156 HOLIDAY ALREADY ACTIVATED.
CLD2157
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD2157 HOLIDAY ALREADY DEACTIVATED.
CLD2158
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD2158 FUNCTION: '(&00)'. DATA AREA TOO SMALL.
Meaning
Internal error in the calendar editor.
The data area passed at the function call (&00) is too small.
Response
Contact the system administrator; collect diagnostic material
and pass it on to the system diagnostics staff.
CLD2159
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD2159 FUNCTION: '(&00)'. INVALID SYMDAT AREA.
Meaning
Internal error in the calendar editor.
The SYMDAT area passed at the function call (&00) is valid.
Response
Contact the system administrator; collect diagnostic material
and pass it on to the system diagnostics staff.
CLD2160
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD2160 FUNCTION: '(&00)'. INVALID HOLIDAY AREA.
Meaning
Internal error in the calendar editor.
The holiday area passed at the function call (&00) is invalid.
Response
Contact the system administrator; collect diagnostic material
and pass it on to the system diagnostics staff.
CLD2161
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD2161 INVALID AREA FOR STANDARD WEEK PROVIDED.
Meaning
Internal error in the calendar editor. An invalid area was passed
for the standard week.
Response
Contact the system administrator; collect diagnostic material
and pass it on to the system diagnostics staff.
CLD2162
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD2162 ERROR IN HOLIDAY FILE.
Meaning
The holiday file or a holiday within the holiday file is incorrect.
Response
Refer to manual for expected file attributes of the holiday file
and the syntax of holiday definitions within the holiday file.
Correct the holiday file or the definitions of the holidays.
Create calendar again or define holidays manually.
CLD2163
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD2163 START OF CALENDAR BEFORE 1970 OR END OF CALENDAR AFTER 2030.
Meaning
A date before 1970 was given for the start of the calendar or a
date after 2030 was given for the end of the calendar.
Response
Enter correct date for calendar start or calendar end.
CLD2164
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD2164 START DATE OF CYCLIC SYMDATE OUTSIDE LIMITS OF CALENDAR.
Meaning
The start date of a cyclic SYMDAT is outside of the limits
of the calendar.
Response
Enter correct start date or modify the limits of the calendar.
CLD2165
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD2165 FUNCTION '(&00)' NOT ALLOWED WITH OPENMODE READ.
Meaning
Internal error in the calendar editor. The function (&00) was called
although the calendar was opened with OPENMODE READ .
Response
Contact the system administrator; collect diagnostic material
and pass it on to the system diagnostics staff.
CLD2166
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD2166 START DATE OF CYCLIC SYMDAT WITH CYCLE TYPE WORKDAY ERASED.
Meaning
The start date of a cyclic SYMDAT with cycle type WORKDAY is
not contained within the limits of the calendar due to a changes of
the limits of the calendar. The start date is undefined.
CLD2167
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD2167 "02.29" MUST NOT BE DEFINED AS CYCLIC HOLIDAY.
Meaning
Leap day must not be used as the date for a cyclic holiday.
Response
Change date or define as a non-cyclic holiday.
CLD2168
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD2168 INTERNAL ERROR '(&00)' AT FUNCTION '(&01)'.
Meaning
Internal error in the calendar editor. The return code (&00) was returned
when the function (&01) was called.
Response
Contact the system administrator; collect diagnostic material
and pass it on to the system diagnostics staff.
CLD2169
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD2169 NAME MUST BE FULLY QUALIFIED.
CLD2170
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD2170 CALENDAR SUBSYSTEM NOT AVAILABLE.
Meaning
The CALENDAR subsystem was not activated.
Response
Contact system administrator. The CALENDAR subsystem has to
be activated by the system administrator.
CLD2171
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD2171 CYCLE VALUE MUST BE GREATER THAN 0.
Meaning
The cycle value has to be greater than 0.
Response
Enter correct cycle value.
CLD2172
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD2172 MAXIMUM NUMBER OF SYMDATS REACHED. CANNOT DEFINE A NEW SYMDAT.
Meaning
No further SYMDAT can be defined. Maximum number of SYMDATS
already reached.
Response
Delete SYMDATS that are not needed any longer.
CLD2173
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD2173 MAXIMUM NUMBER OF HOLIDAYS REACHED. CANNOT DEFINE A NEW HOLIDAY.
Meaning
No further holiday can be defined. Maximum number of holidays
already reached.
Response
Delete holidays that are not needed any longer.
CLD2174
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD2174 NAME MUST NOT BE "$".
Meaning
A name must not consist of "$" alone.
Response
Enter correct name.
CLD2175
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD2175 FHS ERROR AT OUTPUT FORMATTING.
Meaning
Internal error in the calendar editor. An FHS error occurred
during formatting of output.
Response
Contact the system administrator; collect diagnostic material
and pass it on to the system diagnostics staff.
CLD2176
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD2176 FHS ERROR AT READ FORMATTING.
Meaning
Internal error in the calendar editor. An FHS error occurred
during formatting of input.
Response
Contact the system administrator; collect diagnostic material
and pass it on to the system diagnostics staff.
CLD2177
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD2177 FHS ERROR AT WRTRD.
Meaning
Internal error in the calendar editor. An error occurred during
input / output of the format.
Response
Contact the system administrator; collect diagnostic material
and pass it on to the system diagnostics staff.
CLD2178
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD2178 WRONG CONTROL CHARACTER IN INPUT MESSAGE.
Meaning
A key was pressed that caused an invalid control character
in the input.
Response
Retry with correct input.
CLD2179
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD2179 FORMAT ON SCREEN DESTROYED.
Meaning
The format on the screen was destroyed after the last output.
The last format is redisplayed. The input could not be read.
Response
Type last input again.
CLD2180
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD2180 DUE2 KEY PRESSED
Meaning
The DUE2 key was pressed.
Response
Use DUE/ENTER/F7/F8/F12/F13.
CLD2181
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD2181 EDITOR ABORTED.
CLD2183
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD2183 FHS RETURN CODE = X'(&00)'.
CLD2184
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD2184 PLEASE REPEAT INPUT.
CLD2185
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD2185 FHS ERROR AT INPUT FORMATTING.
Meaning
Internal error in the calendar editor. An FHS error occurred
during formatting of input.
Response
Contact the system administrator; collect diagnostic material
and pass it on to the system diagnostics staff.
CLD2186
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD2186 IMPOSSIBLE TO ASSIGN NEW DAYS TO A HOLIDAY.
Meaning
There are only 1860 days assignable to a holiday.
This limits is reached now.
CLD9001
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD9001 CALENDAR NAME: (&00)
CLD9002
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD9002 ------------------------------------------------------------------------
CLD9003
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD9003 ---------------------------- ASSIGNED DATES ----------------------------
CLD9101
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD9101 BASIC INFORMATION
CLD9102
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD9102 CALENDAR LIMITS START : (&00)
CLD9103
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD9103 END : (&00)
CLD9104
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD9104 STANDARD WEEK WORKING HOURS
CLD9105
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD9105 START END
CLD9106
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD9106 DAY ATTR (HH:MM) (HH:MM)
CLD9107
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD9107 MON (&00) (&01) - (&02)
CLD9108
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD9108 TUE (&00) (&01) - (&02)
CLD9109
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD9109 WED (&00) (&01) - (&02)
CLD9110
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD9110 THU (&00) (&01) - (&02)
CLD9111
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD9111 FRI (&00) (&01) - (&02)
CLD9112
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD9112 SAT (&00) (&01) - (&02)
CLD9113
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD9113 SUN (&00) (&01) - (&02)
CLD9201
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD9201 LIST OF DAYS
CLD9202
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD9202 DAY INFORMATION
CLD9203
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD9203 INFORMATION ABOUT CURRENT DAY
CLD9204
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD9204 DATE DAY ATTR #SYM WORKING HOURS HOLIDAY
CLD9205
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD9205 - SYMBOLIC DATE ---------- TIME ----- SYMBOLIC DATE ---------- TIME ----
CLD9301
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD9301 LIST OF SYMBOLIC DATES
CLD9302
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD9302 SYMBOLIC DATE INFORMATION
CLD9303
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD9303 SYMBOLIC DATE TIME TYPE CYCLTYP CYCLVAL CYCLALT
CLD9401
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD9401 LIST OF HOLIDAYS
CLD9402
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD9402 HOLIDAY INFORMATION
CLD9403
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD9403 HOLIDAY NAME TYPE ACTIVE
CLD9404
Destination: USER-TASK Routing code: Weight:
Warranty : NO
CLD9404 HOLIDAY NAME TYPE ACTIVE DATE